Manual

7
3. MAKING / RECEIVING CALLS
- Place the loop around your
neck. Switch the Power
ON/OFF switch
on the side to ON position.
- Switch your hearing aid to T
mode.
- Press the HOOK ON/OFF
button. You are ready to
speak through your iLoop
TM
+.
- The Green LED will turn ON.
- During the call you can adjust the volume of your
device by using the volume control knob located
at the bottom of the iLoop
TM
+.
NOTE:
●The Breakout connector will release if the unit
gets entangled with the cables, so as to avoid
injury to the neck. If this happens, plug back the
connector in the jack to resume normal operation.
MAKING / RECEIVING CALLS