Manual

6
NOTE:
● Always disconnect the plug of the iLoop
TM
+ from
the telephone and place the Power On/Off
switch on the side of the unit
to OFF position, before
installing the batteries.
● When the batteries are
discharged, the Red LED will
light up. Charge the batteries
immediately to avoid damage
to the unit or the batteries.
● Check that the microphone/headphone socket is
compatible with the 4 contact plug (speaker R &
L, common, mic). Otherwise if you encounter
some problems you can connect the small jack
adapter provided, so as to have compatibility
with plug (speaker R & L, mic, common).
● Do not dispose off batteries in household
rubbish. Pay attention to the battery regulations
regarding battery disposal.
POWER SUPPLY / CONNECTING