Cordless Telephone User's Guide

Using Several Base

A second base can be connected to the network in order to extend the

range of the handsets. When another base is registered to a handset, the

handset can automatically search for the next base if you go outside the

range of the first base. The transfer between bases is handled

automatically, although this cannot be done whilst a call is in progress.

The bases coverage areas must overlap to ensure there are no gaps in

the coverage.

Adding a Base

Connect the base to the mains power and telephone network as

described in the Installation section

section

Remark: The first registered handset has priority on the first base. It will

be activated when the handset move sto the second base

To check if your handset or all handsets registered to this new base are

actually registered, simply press the

button on the new base, all

handsets registered to this base will ring.

IMPORTANT: If you connect several bases together, the handsets

registered to the additional bases will ring for a few seconds during

an incoming call even if you take the line with one of the first base

handsets.

Other Optional Accessories

If you wish you can connect a headset ref: HEADCL_BLK ( CLA3) or a

neck loop Ref : CLA7 to the socket located on the bottom of the handset.

You can still use all phone functions as described before. To answer a call

simply press

to take the line and press a second time to

release the line.

DDITIONAL HANDSETS & BASES