Cordless Telephone User's Guide

Up to 4 handsets can be registered to one base. This means you can

make internal calls between registered handsets, transfer an incoming call

between handsets and answer a call anywhere in the office or home as all

the handsets will call at the same time.

You can also register up to 2 bases to each handset. This will increase

the phone range, allowing you to move between the telephone coverage

areas.

The additional handsets will not be equipped with the answering machine

function. This function is only assigned to the main handset (Ampli DECT

300 only).

Using Several Handsets

If you buy new handsets to use with your Ampli DECT telephone, they will

have to be registered to the base before you can use them.

Handset Registration

Unplug the mains adaptor from the base for a few seconds

Replace the mains adaptor. The handset icon will be flashing

Press to activate the menu

Use and to scroll through the menu to find the desired ringer

icon -

.The selected icon will flash on the display

Press to select the icon and enter the registration menu

Use the keypad to type in the base PIN (default 1111)

Press to confirm the PINand exit the PIN menu

The handset is now searching for the base to be registered

A beep will be heard when the handset is registered to the base.

will stop flashing

DDITIONAL HANDSETS & BASES

1/1 0000