Operation Manual

If you are using this telephone with a hearing aid, set your

hearing aid to the T setting.

1 -Answer a call

- When an incoming call is received the phone will ring and

flash, to answer the call lift the handset and speak.

- On completion of the call, carefully replace the handset in the

cradle to release the line. See also section on Auto/Manual

switch

2 - Making a call

- Lift the handset.

- Await the dial tone and dial the required number.

- On completion of the call, carefully replace the handset in the

cradle.

See also section on Auto Dial On/Off switch

3 - Last number redial

- Lift the handset.

- Await the dial tone and press button.

- The previously dialled number will be automatically redialled

(not in use for memory numbers).

Note: If Auto Dial On/Off switch is set to ON position ( ), if the

Last Number Redial Button is not pressed within 4 secs of lifting

the handset, the number stored in SOS memory will

automatically dial out.

4 - Recall (R), * & # buttons

These are used with the new services provided on digital

exchanges. For details please contact your network operator.

USING THE PHONE