Operation Manual

Making a Call

Pick up the handset.

When you hear the dialling tone, dial the number on the

keypad.

To end the call simply replace the handset in the cradle

Making a Call – Hands Free

Press the button to get a dialling tone then dial the telephone

number on the keypad. The icon appears on the LCD. To

end the call, simply press again. The icon will disappear.

To activate the Hands Free function during the call, press the

button and replace the handset on the cradle at the same time.

To deactivate the Hands Free function during a call, lift the

handset.

Note: When in hands free mode, only one person may talk at a

time. The switch-over between speaker and microphone is

automatic. This is dependent on the sound level of the incoming

call and the microphone respectively. It is therefore essential

that there are no loud noises, e.g. music, in the immediate vicinity

of the telephone, as this will disrupt the hands free function.

Speakerphone Volume Setting

In hands free mode you can adjust the speaker volume by using

the volume controls VOL+or VOL- located on the right side of the

phone.

USING THE TELEPHONE