Operation Manual

AMPLIFY ON/OFF Switch at OFF Position ( )

The additional amplification and tone controls are turned off each

time you use the telephone. The Amplify LED will be off

whenever you use the telephone.

Pressing the Amplify key ( ) once during a call will enable tone

control and additional amplification. The LED light will turn on to

reflect this change. If you press the Amplify key ( ) once more,

the additional amplification and tone control features will be turned

off once again. The LED light will turn off to reflect this change.

Irrespective of how many times you press the Amplify key ( )

throughout a call, the next time you pick up the handset, these

functions will be turned off once again.

Tone Receiving Adjustment

If the receiver volume has been amplified, the tone control can

also be adjusted. You can adjust and increase the low frequency

or high frequency sounds with the tone slide control on the top of

the unit.

Note: The tone adjustment function will not be affective when the

amplify feature is not being used

SETTINGS