Operation Manual
Table Of Contents

89
BASE: On hearing the tone, record your personal
outgoing message. When you have finished speaking
press the ‘STOP’ soft key. If you speak for longer than
3 minutes, recording will stop automatically. Whilst
recording the LCD will show ‘RECORD’ The new OGM
will be played after recording
Use the Base to Record Announce1 &
Announce2
Press and hold the or key on the base unit until you
hear the voice prompt. Use the key or ‘STOP’ to finish at
anytime
Notes: When recording, speak towards the microphone at the
bottom of the front panel of the base. Keep about 20cm distance
from the microphone for the best results.
If you record/playback/restore Announce1 or Announce2, the
answer mode will be switched to the corresponding mode.
Checking the Outgoing Message
Press ‘TAM’ soft key to activate the answering machine
Press ‘SELECT’ soft key to choose ‘ANNOUNCE’
Press ‘SELECT’ soft key to choose ‘ANNOUNCE1’ or
Press to choose ‘ANNOUNCE2’ and press
‘SELECT’ soft key
Press ‘SELECT’ soft key to choose‘PLAYBACK’
ANSWERING MACHINE