Operation Manual

39
Press (left side) to select
You will be prompted to enter the old PIN code (default is
0000). ‘PIN ?’ . Enter the old Pin using the numeric
keypad. Press ‘NEXT’ soft key to go to the next screen.
If the old PIN code is accepted, you will be prompted to
enter a new PIN code. ‘NEW PIN’
Enter new PIN code using the numeric keypad and press
(left side) to go to the next screen
You will be prompted to confirm the new PIN code,
‘REPEAT’. Enter new PIN code again..
Press (left side) to save. Either press to
return to standby or wait 30 seconds
Base Default
You can reset the base settings to the factory default.
Press ‘MENU’ soft key to acivate the menu
Use and to scroll through the menu to select
‘BS SETTINGS’
Press (left side) to select
Use and to scroll through the menu to select
‘BS RESET’
BASE SETTINGS FROM HANDSET