Operation Manual

37
Dialling Mode Setting
In the UK, all telephone exchanges now use Tone dialing. If your telephone
does not dial out, it is probably being used from an older private switch- board
(PBX). In this case, the Tone/Pulse setting must be changed to Pulse.
Press ‘MENU’ soft key to acivate the menu
Use and to scroll through the menu to select
‘BS SETTINGS’
Press (left side) to select
Use and to scroll through the menu to select
‘DIAL MODE’
Press (left side) to select
Use and to scroll through the menu to select
either
‘TONE’ or ‘PULSE’
Press (left side) to save. Either press to
return to standby or wait 30 seconds
Flash Time Setting
You can adjust the flash time setting. There are two options
available. Your telephone works with a flash time for United
Kingdom (R=100ms).
Press ‘MENU’ soft key to acivate the menu
BASE SETTINGS FROM HANDSET