Instructions

4.11.4 Delete the Entire Redial List

Using a handset:

1. Follow Steps 1 and 2 in section 4.11.1.

2. Press and / to select DELETE ALL.

3. Press to confirm.

4. Press to reconfirm.

Using the base:

1. Follow Steps 1 and 2 in section 4.11.1

2. Press MENU/OK and / to select DELETE ALL?

3. Press MENU/OK to confirm.

4. Press MENU/OK to reconfirm.

4.12 Find the Handset

This feature helps you find the misplaced handset(s).

You can locate the handset by operation on the base station as below .

1. In idle mode, press MENU/OK and / to select PAGE ALL HS.

2. Press MENU/OK to confirm. “PAGING” w ill flash on the base screen.

All the handsets registered to the base w ill produce the paging tone, and “PAGING” w ill

flash on the screen. You can stop the paging by pressing / / /

CANCEL/MUTE on any handset or INT/MUTE/CLEAR on the base to stop paging.

NOTE:

If there is an incoming call during paging, the phone w ill ring w ith the incoming call

instead of paging.

YOUR PHONE