User Guide

1 2 3 4
QUICK USER GUIDE
Base
Handset
Connection base
!!! Please refer to our website: www.geemarc.com for an up to
date user guide, as there may be important updates and
changes you need to be aware of !!!
PACKAGE CONTENTS
1 Telephone base, 1 cordless Handset, 1 power adapter, 1
Telephone line cord, 3 NiMh batteries, 1 Quick user guide.
INSTALLATION
Connecting the telephone
Connect the telephone cable to the telephone line socket (A) and to
the telephone wall socket (B).
Connect the power adapter jack to the base (and DC charger) (C)
then connect the power adapter plug in mains power (D).
Note: Use only the power adapters supplied with the phone.
Connecting the battery
Slide the battery cover downwards.
Install the 3 batteries into the socket as indicated, matching correct
polarity(+,-).
Align the cover flat against the battery compartment, and then slide
it upwards until it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for the first
time.
OVERVIEW
Base
1. /HANDSET LOCATOR
While the phone is idle, press to page all handsets.
2. IN USE
ON when handsets or the base are in use, or when the answering
system is answering an incoming call.
ON when a handset is being registered.
Flashes when there is an incoming call or in page mode.
3. PICTURE BUTTONS
10 big picture memory buttons or to dial a phone number from the base.
4. FLASH / PROG
On line: Press the key to make a recall.
In idle mode: Press this key to program the picture memory buttons.
5. MICROPHONE
6. SPEAKER MODE INDICATOR
On when the speaker is on.
7. SPEAKERPHONE KEY
NOTE: wait 2 seconds before to dialling the phone number with the
picture memory buttons.
8. VOL ( )
During speaker mode, press to decrease the speaker volume. While
in idle mode, press to decrease the base ringer volume
.
9. VOL ( )
While in idle mode, press to increase the base ringer volume.
During speaker mode, press to increase the speaker volume.
Handset
10. EARPIECE
11. LCD DISPLAY
12. CHARGE LIGHT (
)
Steadily on when the handset is charging in the charger.
13. MENU/OK (
)
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook / Redial list /
Call log.
14. UP/CALL LIST (
)
In idle mode: Press to access the redial list.
In menu mode: Press to scroll up the menu items.
In phonebook list/redial list/call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume
.
15. TALK ON ( ) SPEAKERPHONE ( )
In idle/pre-dial mode: Press to make a call in earpiece mode.
In phonebook/redial list /call list: Press to make a call to the
selected entry in the list in earpiece mode.
During ringing: Press to answer a call in earpiece mode.
On line: Press again to pass in speakerphone mode. Press again to
switch to earpiece mode
.
16. DOWN/PHONEBOOK ( )
In idle mode: Press to access the phonebook.
In menu mode: Press to scroll down the menu items.
In phonebook list/redial list/call list: Press to scroll down the list.
In editing mode: Press to move the cursor one character to the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume
.
17. MICROPHONE
18. VOLUME BOOST/SOS ( /SOS )
During a call: Press to activate/deactivate the VOLUME BOOST
function.
In idle mode: Press and hold for 3 seconds to enter the emergency
calling sequence set in your handset.
In call mode: press and hold for 2 seconds to stop the emergency call.
19. TONE
During a call: press this key to increase the high frequency or the
low frequencies.
20. CANCEL/MUTE (
)
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
In editing/pre-dial mode: Press to delete a character/digit.
In editing/pre-dial mode: Press and hold to delete all the characters /
digits.
During a call: Press to mute/resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to intercom another handset.
21. TALK OFF ( )
During a call: Press to end a call and go back to idle screen.
In menu/editing mode: Press to go back to idle screen.
22. ALPHANUMERIC KEYPAD, STAR (
0
), HASH (
R
)
In predial or editing mode: Press to insert a digit / character /
/ .
R
during a call: Press and hold to make a Flash (Recall).
0
key in idle/pre-dial mode/number editing mode: Press and
hold to insert a pause.
FIRST USE OF YOUR HANDSET
After you have inserted the batteries, the display asks you to select
your language with the keys ▼/▲, press MENU/OK to valid.
Then enter the date with the keypad and validate by pressing
MENU/OK
Enter the correct hour with the keypad and validate by pressing
MENU/OK.
MENU SETTING
The phone settings are always set in the same manner:
Press Menu/OK button to open the main menu. Then use the
▼▲buttons to select an entry and confirm it by pressing the Menu/OK
button.
Handset
CALL LOG
►VIEW LIST
under an entry: DETAILS ►ADD TO PB ► ADD TO BL► DELETE
►DELETE ALL
PHOTO MEM: M1 to M0
PHONEBOOK
►ALL►SPEED DIAL►VIP
under an entry: ►ADD ►VIEW ►EDIT ►DELETE ►DELETE ALL
►DEL VIP►ADD TO SD►STATUS
CALL BLOCK
BLACK LIST (under an entry: ►ADD ►VIEW ►EDIT ►DELETE
►DELETE ALL ►STATUS) ►SETTING (BLOCK MODE ►W/O
NUM)
INTERCOM: ►HANDSET*►BASE►ALL
BS SETTINGS
►BS RINGER ►RING VOLUME ►FLASH TIME ►FIRST RING
HS SETTINGS
►RING SETUP ►TONE SETUP ►TEXT LANG ►DATE & TIME
►REGISTER ►DEFAULT
SET SOS: SOS NUMBER ►SOS MSG►SOS LANGUAGE
REMINDER
►ON/OFF (ALARM 1 TO 10)
►(ONCE/DAILY/MON-FRI/SAT-SUN)
TLK DIGITS: ►ON ►OFF
ANS. SYS.
►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF
►SET TAM (TAM LANG► CALLSCREEN, TAM MSG, ANS. DELAY,
RECORD TIME, REMOTE ACC, CHANGE PIN► MSG ALERT)
HANDSET REGISTRATION
Note: Handset and base station are pre-registered.
Up to five handsets can be registered to a single base station.
Registering a handset
On Base: press and hold /HANDSET LOCATOR on the base
until you hear a beep to enter the registration mode.
At the same time On Handset: Press MENU/OK
Use ▼▲to
select HS SETTING and press MENU/OK
.
Use▼▲ to select
REGISTER, Press MENU/OK and REGISTERING is display.
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode
with the new handset number shown. The base display will also go
back to idle mode.
INTERCOM
Internal Call
1) Press MENU/OK
, and ▼▲ to select INTERCOM, Press
MENU/OK
,
2) Choose the desired handset number, Base or ALL and press
MENU/OK
.
If you receive a call on the base in speaker mode, the call is
automatically transferred to the handset if the handset is removed
from the charger.
Call All Handsets
Make point 1 in chapter internal call and choose ALL.
Transfer an External Call
Make point 1 in chapter internal call and choose the desired handset
number with the key UP/DOWN.
After connection quit the call on handset by pressing
.
Conference Call
Make point 1 in chapter internal call and choose the desired handset
number with the keys ▼/▲.
After connection press and hold
until CONFERENCE is shown.
NOTE: Any party that hangs up during a conference call will leave
the other party still connected with the external call.