Operation Manual

LCD Window Icons Description
New Call
Indicates you have missed one
or more calls.
MSG Waiting
Indicates you have one or more
voice messages.
Off Hook
Indicates the line is engaged.
Hands-free
Indicates the handsfree function
is enabled.
Battery Icon
Indicates battery charge level.
Shaker Icon
Indicates the shaker and visual
ringer is enabled.
Signal Icon
Indicates the current signal
strength. If the handset is too far
from the base, this icon will blink
on the LCD.
Alarm Icon
This icon appears when you set
an alarm to ring at a specified
time.
Keypad Lock
This icon appears when the
keypad is locked.
ICM Icon
This icon appears when you have
n e w m e s s a g e ( s ) i n y o u r
answering machine
(AMPLIDECT230™ only)
10
51
TAM Setting (AMPLIDECT285™ only)
TAM On/Off
You are able to switch the answering machine on
or off.
Way 1: Using the menu
1. Press the TAM soft key in Standby mode.
2. Press the key repeatedly to choose TAM
Setting, use the Select key to confirm.
3. Press Select key again to choose TAM
On/Off.
4. Use the key to choose On or Off, press
the Select key.
TAM Alert
A tone will sound every 1 minute when a new
message is received until you review the message.
You are able to switch the tone on or off.
1. Press the TAM soft key in Standby mode.
2. Press the key repeatedly to choose TAM
Setting, use the Select key to confirm.
3. Press the Down key to choose TAM Alert,
press Select key.
4. Use the key to choose On or Off, press
the Select key.
Way 2: Using the base unit
In the active mode (all lights on) press key
on the base unit to enable or disable this
function, the current state will be announced.