Operation Manual

3
Troubleshooting
Symptom
Check & Remedy
No operation
Check that the power adapter is properly connected.
Check that the telephone line cord is properly connected.
Check that the handset batteries in full power.
Check that the handset batteries are installed properly.
No dial tone
Check that the power adapter is properly connected.
Check that the telephone line cord is properly connected.
Nothing appears
on the display
Check that the handset batteries have full power.
Check that the handset is on.
Check that the handset batteries are installed properly.
Handset seems
to have very short
battery life
Caller’s number
is not displayed
Consistently short battery life may indicate that replacement of the batteries is necessary.
Make sure the right batteries are used
Check the charge contacts.
The caller may have withheld their details.
Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.
Make sure you have subscribed to a Caller ID service via your network provider.
58
Unpacking
Once you have unpacked your phone, make sure that all the parts shown below are available. If any
pieces are missing or broken, please promptly call your dealer.
Line cord*
Adapter*
3 AAA Ni-MH
batteries
User's manual
Handset
Base
*The shape of the plugs can vary according to each country’s specification.
Carrying clip