Operation Manual

35
26
HS Name
Range Alarm
Using this feature you can define a name of the
handset. This allows you to easily recognize your
handset if you have more than one registered on
the same base. To set the handset name:
1. Press the Menu soft key.
2. Press the key repeatedly to choose HS
Settings, press the Select soft key.
3. Use the key to choose HS Name, then
press the Select soft key.
4. You can enter the handset name (up to 12
characters) by using the alphanumeric keys
(use the Erase soft key to delete the incorrect
characters), then press the Save soft key to
confirm and exit. The handset name will be
displayed above your handset number in
standby mode.
A beep will sound when the handset is out of
range of the Base. You are able to select to
enable/disable this audible warning.
1. Press the Menu soft key.
2. Press the key repeatedly to choose
HS Settings, press the Select soft key.
3. Use the key to choose Tone Setup,
then press the Select soft key.
4. Use the key to choose Range Alarm,
then press the Select soft key.
5. Use the key to choose On/Off to
enable/disable this audible warning, then
press the Save soft key, you will hear a
confirm beep.
BS Settings
Terminate HS
This function allows you to delete a handset
registration from the base.
BS Settings
Select soft key
3. Press the Select soft key to choose the
Terminate HS menu. The display shows
"PIN?" to prompt you to enter the PIN Code
(The default PIN Code is "0000"). Then
press the OK soft key.
4. Use the key to select a handset. If you
select the current handset or a non-existent
handset, a warning tone will sound.
5. Press the Select soft key to confirm, and the
selected handset will behave according to
the Out Of Range condition.
1. Press the Menu soft key.
2. Press the key to choose ,
then press the .
Flash Time
You can select to change the Flash time by the
following steps:
1.
2. Use the key to choose Flash Time menu.
Press the Select soft key.
3. The display shows the current setting. Use the
key to select Flash-1(100ms for UK)
/Flash-2(270ms) , press the Save soft key.
Perform steps 1 and 2 of previous paragraph.