Operation Manual

39
22
CID Book
2. Use the Select soft key to choose the CID Book,
and if available, the numbers are displayed. (You
can also access the CID book directly by pressing
the Up key in standby mode.)
3. Use the key to view the numbers, you can
make a call by a press of the key. You can
also add the entry to the phonebook.
When you receive a call, if the caller's
information is transmitted from the network on
which the call was made (and the caller doesn't
hide it), the caller's phone number is
displayed. Moreover, when there is a received
call which you missed, the icon will appear
on the LCD. If the CID memory is full, the
icon will blink on the LCD.
Out Of Area - This message will display when
someone calls from an area where the
telephone company is not offering the caller
identification services or is not yet providing
number delivery to your area.
Private - If the caller has exercised the option
to prevent his name and number from being
sent, the message will show on the LCD.
View and dial any of the CID
numbers
1. Press the Menu soft key.
Note:
At step 3, each item of the incoming list is
marked with the icon if the call has been
reviewed or with the icon if the call hasn't
been reviewed yet.
The adjustment allows you to optimize the
visibility of the display by changing its contrast
according to the environment conditions.
2. Press the key repeatedly to choose LCD
Contrast, then press the Select soft key.
3. Use the key repeatedly to choose among
the 17 available contrast levels, then press the
Save soft key.
4. Press the key to return to standby mode.
1. Perform steps 1 and 2 of paragraph "Setting
Alarm" p37.
LCD Contrast Setting
2. Press the key to choose Date & Time
menu, press the Select soft key.
3. Use the key to choose Date Format or
Time Format, press the Select soft key.
4. You can use the key to choose the Date
format (DD-MM/MM-DD) or the Time format
(12-Hour/24-Hour), press the Save soft key
to save.
2. Setting date & time
2. Press the key to choose Set Date or Set
Time menu, press the Select soft key.
3. Enter the current date/time by numeric keypad
and press the Save soft key to save and exit.
1. Perform steps 1 and 2 of previous paragraph.
Setting Date & Time
1. Date & Time Format
1. Perform steps 1 and 2 of paragraph "Setting
Alarm".
Notes:
If you select 12-Hour, AM/PM will appear
on the right of the time in standby mode.
At step 3 you need to enter the time in 24-
Hour format.