Operation Manual

7
54
Keys Description
Dial key
Make/Answer a call.
End key
End a call.
Long press to activate power on/off, as described in page 13.
Up key
Scroll up through lists and menu options.
Increase the earpiece/speakerphone volume during a call.
Enter the CID book, as described in page 20.
Down key
Scroll down through lists and menu options.
Decrease the earpiece/speakerphone volume during a call.
Enter the Phonebook, as described in page 30.
Left key
Set up an internal call to another handset.
Transfer an incoming call to another handset.
Set up a conference call with an external line and an internal handset.
TAM Reset
This function allows you to reset the TAM settings
to the factory default.
1. Press the TAM soft key in Standby mode.
2. Press the key repeatedly to choose TAM
Setting, use the Select key to confirm.
3. Press the key to choose the TAM Default,
press the Select soft key. You will be
prompted to enter the PIN code.
4. Enter the PIN code (the default one is 0000),
then press the Reset soft key. If the PIN code
is validated all TAM settings will return to the
factory default, otherwise a warning tone will
be heard and the settings will remain.
Result: After resetting, the TAM will return to
Standby mode.
Week Date Setting
Before each message is played, the week and time
it was received will be announced. You are able to
use the base to set the week date.
In the active mode (all lights on) press and hold
the key on the base until the current setting is
announced. Press the key repeatedly to set,
use the key to confirm. Every time you press
the key, the system will announce the
corresponding week date.
Note:
If you remove the battery or pull out the
adapter, you need to set the week date
again.
Handset
Navigation key: