Operation Manual

59
Registration
The supplied handset is already registered with the
supplied base (factory setting). Each additional handset
you purchase must be registered with the base. You can
register up to 5 handsets to your base unit. This means
you can make internal calls between registered handsets,
transfer an incoming call between handsets and answer
a call anywhere in the office or home at any time as all
the handsets will call at the same time.
1. Before registering a handset to the base, you should
press and hold base unit key for about 5 seconds.
Release it once the In-Use Indicator/Charge Indicator
light on the base starts flashing. The base is now ready
for handset registration. The following steps must be
completed within 120 seconds.
2. Press the Menu ( ) soft key.
Press the and key to choose
REGISTRATION, then press the key.
Choose base 1 then press the key
On the display, you have the information SEARCHING 1.
3. Enter the pin code 0000. Registration will take about
10 seconds to complete another audible beep will notify
you of success with registration.
ADVANCED FUNCTIONS