Operation Manual

21
Receiving a Call
When a call is received, the Call information will appear
and the LED will flash.
If the caller can be identified, the caller's phone number is
displayed. If the caller cannot be identified, only the Call
information displays. If you have a voice message, the
message "VOICE MAIL" will be shown on the LCD.
1. To answer the call, press the key. If you have
activated the Auto Answer function, when the handset is
on the base, simply lift it up to answer.
2. To end the call, either press the key or replace
the handset on the base.
After you hang up the call, the LCD displays the call
duration.
Notes: You can select the ringer volume by using the Vol
+/- key when the phone rings with an incoming call.
Muting the Microphone
During a conversation, you can temporarily switch your
phone's microphone off, so that the other party cannot
hear you.
BASIC FUNCTIONS