User Guide

Headset

You can also use your Ampli600 in hands free mode with an optional head-

set, this is ideal for use with a computer screen.

To use the headset

Connect the headset into the headset socket located

at the back of your telephone.

Press the headset key to get the dial tone

Dial the number

To answer a call, press Headset key whilst the phone is ringing

You can adjust the volume and tone level of calls received with the

VOLUME and TONE slide buttons located on the top of the phone (if func-

tion is active) and the sending level with the 3 position switch located on

the right side.

Neckloop

Connect the neckloop into the neckloop socket

located at the back of your telephone.

Press SPKR or lift handset to activate the neckloop and

speak into the microphone on the neckloop or handset respectively

The neckloop also has a volume control

To answer a call, press SPKR or lift handset whilst the phone is ringing

Note: The Ampli600 must be connected to the mains in order to use a neck

loop.

OPTIONAL ACCESSORIES