Telephone User Guide

IMPORTANT: If you connect several bases together, the handsets registered

to the additional bases will ring for a few seconds during an incoming call

even if you take the line with one of the first base handsets.

3 - HANDSET REGISTRATION

How to register a handset to a base unit:

1 - Unplug the mains adaptor from the base unit during few seconds.

2 - Replace the adaptor to the power socket.

3 - Press the

key.

4-Pressthe

( )orthe ( )keytoselectthe iconshownonthe

display. The selected icon will flash on the display, then press

key; 1/1 0000

will be displayed.

5 - Enter the base unit PIN code (factory setting to 1111), then press key.

6 - The handset is now searching for the base unit to be registered, a beep will be

heard when the handset is registered to the base.

Note: the handset supplied with the base unit is already registered to the base unit.

So it is not necessary to register this handset.

4 - HANDSET DEREGISTRATION

To deregister the current handset from the base unit follow the instructions

below:

1 - Press the key.

2-Pressthe

andthe keystoenter number,1/10000willbedisplayed.

3 - Enter the base unit PIN code (factory setting to 1111), then press key.

The handset is deregistered from the base unit and a beep will be heard when the

handsetisregisteredtothebase.Ifyouwishtouseseveralhandsetsandbaseunits,

all handsets must be registered. Each handset you want to use must be registered

separately to the base unit. You can register up to 2 base units for one handset and

up to 4 handsets can be registered to one base unit.

HANDSET SETTINGS