Telephone User Manual

Hold Off:

In hold mode, put the handset on cradle. Then pick up the

handset again or if the parallel phone goes off hook, the Hold

function will be disabled and all speech meter LEDs are turned off.

12 - Amplification Setting

a.Set the AMPLIFY Switch located at rear side of unit to ON

position, the Amplification is auto on when handset is lifted.

b.Set the AMPLIFY Switch to OFF position, the

Amplification is off when handset is lifted.

13 - Receive Volume Amplification

When unit is off-hook, press the button to toggle the

amplification On & Off

Amplification On:

When amplification is on, the corresponding LED on, +15dB extra

amplification is applied to the handset receive volume control.

Amplification Off:

When amplification is off, the corresponding LED is off, no extra

amplification to the handset receive volume control.

14 - Flash Time Setting

a.Set the flash Switch located at rear side of unit .set to 100ms

position (for UK), the time is auto set in 100ms mode when

handset is lifted.

b.Set the flash Switch to 600ms position (for US), the time is auto

set in 600ms mode when handset is lifted.

USING THE PHONE