User's Manual

- 19 - - 20 -
The following table lists the available and unavailable custom functions of this flash.
1.Long press <SET> button for 2
seconds to enter the C.Fn menu.
2.Choose custom function signs.
Press <+> <-> to set custom function
signs.
3.Change the setting.
Press <SET> button to choose
between customize functions
4.Exit C.Fn menu.
Long press <SET> button to exit.
C.Fn :Setting custom Functions
Setting & Descriptions
OFF
No Operation
Auto Standby
Setting Signs
OF
30 min
60 min
Functions
Standby Modes
Custom
Function Signs
F1
ON
OFF
OFF
ON: Trigger 2 times
for 1 cycles,
1st flash of the trigger.
ON
OFF
OF
01
Beeper
Mask
F2
F3
Can be triggered as the
second curtain
OF, 0.01~30s
Delay Flash
F4
Version Information
F9
ON: Trigger 2 times
for 1 cycles,
2nd flash of the trigger.
02
Technical Data
Model
Wireless Slave Unit Mode
Flash Mode
TTL/ M/Multi
GT-200
Radio transmission mode (compatible with Canon & Nikon & Sony & Fujifilm)
Slave radio transmission
Guide No. (1/1 Output)
53(m ISO 100, @35mm)
POWER
Power Output
Stroboscopic Flash
Flash Compensation
Sync mode
Delay Flash
Mask
Beeper
Modeling Lamp (LED)
Optic Slave Flash
Flash Duration Indication
·Wireless Flash (2.4G transmission)
Wireless Flash Function
Controllable Slave Groups
Transmission Range (Approx.)
Channel
200W
8 steps: 1/128~1/1
Provides (up to 90 times, 99Hz)
±3 stops in 1/3 stop increments
High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync
0.01~30s
√
√
√
S1/S2
√
Slave unit, OFF
4 groups: A, B, C, D
50m
1~16
·Power Supply
Power Supply
Full Power Flashes
Recycle Time
Battery Indicator
Power Indication
·Sync Triggering Mode
·Color Temperature
·Dimensions
Volume
Net Weight
Lithium battery pack (14.4V/2900mAh)
500
Approx. 0.01-2.1s
√
Power standby automatically after approx. 30 minutes without operation.
2.5mm syncline, a wireless control port
5600±200k