User's Manual

Nikon master control mixed mode
Setting for groups
① Press【MODE】button to select transmitter mode
as Nikon master control Mixed mode (as pic showed)
② Press【A】/【B】/【C】【D】for a few seconds
to select or exit f lash grouping setting, the arrow
refersto the group you’re setting.
/
15 16
Automatic Focus Assist
High-speed sync
Wireless Channel
Group A Flash settings
Group B Flash settings
Group D Flash settings
Focal distance
Aperture
Group C Flash settings
Nikon master control mixed mode
③ After selected a group, press 【MODE】button to
set the flash mode of the group,every modes
parameters are as below:
TTL : Compatible with i- TTL , Exposure
compensation adjustment available from -3.0EV to
+3.0EV, total 22 levels; press【↑】/【↓】
button to change Focal distance for different groups.
M: Flash output range 1/128~1, press【←】/
【→】to increase or decrease 0. 3EV, ( Adjustment
available for total 22 levels), press【↑】/【↓】
button to change Focal distance for different groups.
OFF: The group does not involve flash.
④ After you finished the flash parameters for the
groups, press A/B/C/D button again to exit setting
and sent the flash info to the others flash light which
in the different groups but the same Channel.
※ Under this mode, it’s available for 4 flash lights
engage exposure with different mode and different
power.