C1 (Commander) Flash Trigger Operation instruction Fit for Canon
Catalog Safety instructions Function List Components LCD screen Component instruction Preparation before use Functions description Custom function/FN Sync mode setting Wireless channel setting Assisted focusing light Hot Shoe 3 MODES Canon universal mixed mode Canon master control Multi mode Compatible Devices Specification List 01 02 03 05 06 08 09 11 13 14 15 16 17 18 23 26 27
Safety instructions Function List Please read this manual carefully before use. 1. Available flash mode: E-TTL, E-TTL(Ⅱ), M, Multi. 2. Available for Front curtain sync/back curtain sync/ high-speed sync, highest sync speed 1/8000s. 3. Exposure compensation available. (FEC) 4. Surround expose available. (FEB) 5.Exposure Lock available.(FE LOCK) 6. Available for focusing assist lamp.(can be disabled) 7. Available for mixed flash mode, such TTL, M. 8. Available for setting auto save function. 9.
Components Rubber cap Micro USB Group B Group A/ Custom function setting 03 Components Mode Test Indicate light LCD Screen Group C/ Sync mode button Group D/Channel setting Power switch: ON/OFF Setting/restore factory setting Setting (up/down/ left/right) Battery door Twist lock Mounting holder 04
Components Component instruction LCD Screen Power Switch: Automatic focusing assist Back curtain sync High-speed sync Manual /strobe flash mode Wireless channel Flash setting for A Flash setting for B Flash setting for C 05 Slide to 【ON】 to power on.
Component instruction Preparation before use Hot Shoe contacts: Use it to connect with camera, compatible with Canon. Mode: Transmitter mode option Test: Send flash signal for groups A:B:C:D Enter/exit flash setting for groups Indicate light: Power wireless communication or command indicate Battery loading Indicate light status Open the battery hatch. Install two AA batteries according to the positive and negative directions of the battery, when installation completed, close the battery hatch.
Preparation before use Install the trigger on the hot shoe contact from top of camera. Functions description Power on Load batteries correctly, push the switch to 【ON】to turn on the trigger, then LCD screen & 2 color lights are on simultaneously, system check and complete initialization, enter standby mode, red indicator flashing.
11 Automatical focusing assist Flash surround exposure order Flash surrounding exposure automatically cancel Functions Disable Enable Status setting Instruction Press 【FN】for 2 seconds, system will change between customized settings and flash modes, enter custom mode, press 【↑】/【↓】to select options, press 【←】/【→】 to set option number. PS: The option of Fn number 1-3 can be set by Canon's online status by accessing the "External flash's custom function settings" in the camera menu.
Sync mode setting In universal mixed mode, press 【 C 】button for 2 seconds, the sync mode will change from “high- speed sync ”, “back curtain sync ”, “front curtain sync(no pic)”. In Canon master mixed mode, press switch button for 2 seconds, the sync mode will change from “high-speed sync ”and “front curtain sync(no pic)”. Achieve different flash effects. 13 Wireless channel setting wireless channel light flickers and enters wireless channel setting,press 【←】/【→】 to set channel from 1 to 16.
Assisted focusing light Hot Shoe If you enabled “automatic focusing”on transmitter, When the light is not enough to focus automatically, it will enable the assist focusing light in trigger to help to make focusing easier. Connecting trigger with Canon Cameras, Press the shutter lightly, trigger will identifies the camera automatically, and send the trigger setting status to flash to I-TTL offline flash, the highest sync speed is 1/8000s.
3 MODE Canon mixed mode A：Canon mixed mode B：Canon master control mixed mode C：Canon master control Multi mode ② Press 【A】/【B】/【C】/【D】for a few seconds to select or exit flash group setting, The arrow refers to the group you’re setting. A: Canon mixed mode ③ After selected a group, press 【MODE】button to set the flash mode of the group,every modes, settings are as below: TTL: Compatible with E-TTLII, Exposure compensation adjustment available from -3.0EV to +3.
Canon mixed mode Canon mixed mode ④ After you finished the flash setting for the groups, press A/B/C/D button again to exit setting and sent the flash info to the others flash light which in the different groups but the same Channel. 2.Only available for series A cameras, cameras exposure mode need to be P/AV/TV/M. ① Press 【Menu】to select flash control-external flash function setting. In this mode, it’s available for each flash group to engage expose via different flash mode and power.
Canon mixed mode Canon mixed mode ② In this mode, Camera shows info as picture. ③ Via internal menu setting, the user can set the sync speed level for shutter and exit group setting in FEB exposure mixed mode, or press【Test】or the transmitter passes the settings to each group of flash lights on the same channel while the flashes are online, after the flash displays the received modes and parameters, it executes the appropriate operation.
Canon master control Multi mode Canon master control Multi mode Setting for groups ② In the non-set state, press 【←】/【→ 】to set power output for Group A, Press【A】/【B】/【C】 【D】for a few seconds to select or exit flash group setting. After selected a group, press 【MODE】 button to set the flash mode of the group, every mode.
Canon master control Multi mode Compatible Devices ③ Press【OK】button, when Frequency flickered, press【← 】/【→】button to set flash frequency from 1-199Hz. 1. 3 series Canon Camera, based on different functions. ④ Strobe flash Press【OK】button, when times flickered, press 【←】/【→】to set flash times, the maximum flash times are influenced by Group A Power. Group A Flash power & Flash frequency connection table Flash power 1/128 1/64 1/32 1/16 1/8 1/4 Flash times 1-8 25 1-40 1-20 1-12 I.
Specification List System mode: Digital FSK 2.4G HZ Wireless Trigger Communication Distance: 50 meter Wireless Channel: 16 Flash mode: E-TTL, M, Multi. Synchronous mode: Front synchronize, Back synchronize, High Speed synchronize. Group control:A\B\C\D 4 groups (Each group can be set separately, flash ratio also can be set. Function: Available for FEB, FE lock and FP Synchronous speed: 1/8000s Compatible Flashlight: Studio flashlight, Photo flash, G Series.
