Installation Guide

4
Note: at least two people will be required to mount the hood.
INSTALL THE HOOD
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of
the hood with the wall-mounting bracket. Gently
lower the hood until it securely engages t
he
br
acket.
3. Open the Al. filter and find the two φ8 mm
holes on the back of the hood. Level the h
ood
w
ith 2 mounting screws (4*30mm) with washer
.
U
se drywall anchors provided.
4. M
easure the height of the glass to the slider duct fixi
ng
su
pport. Adjust the height of the chimney according to t
he
hei
ght. Then use the duct fixing support with two scre
ws
(
4x8mm) to fix the chimneys. Shown as in the picture.
5. P
ut the chimney on the hood, use two screws (4x8mm)
to fix the chimney to the slider duct fixing support.
6. Use the other two screws (4x8mm) to fix the bottom of
chimney.
7. After adjusting the position, open the filter and fix
t
he body inside with safety screws.
4x8mm
Screw