Installation Guide

3
1.
After evaluating the height of the hood, place the hook
center over installation location. Drill 3 holes of Ø8mm on
a suitable place to fix the mounting brackets.
INSTALL MOUNTING BRACKETS
2. Put the drywall anchors into the holes and fix the
m
ounting screws (4x40mm) into the anchors, and install
the hook on the wall as shown.
INSTALL SLIDERY DUCT, FIXING SUPPORT
1. Calculate the final height of the U-shaped section, drill 2
hol
es of Ø8mm on a suitable place in line with the slider
duct fixing support.
2. Put the drywall anchors into the holes and fix th
e
m
ounting screws (4x40mm) into the anchors, and install
the hook on the wall as shown.