Use and Care Manual

2
 After you have connected the appliance to the mains supply the backlight will turn on. It will turn
of
f after 5s without any operation and the hood will enter stand-by mode.
TOUCH CONTROLS
 P
ress one of the speed butt
ons
to turn the appliance on.
 P
ress the button
for low speed. Push the button again and the motor will stop.
 P
ress the butt
on
for medium speed. Push the button again and the motor will stop.
 P
ress the butt
on
for high speed. Push the button again and the motor will stop.
 P
ress the butt
on
and the lights will come on. Push the button again and lights will turn
off.
 W
hile the range hood is in use, if you press the timer butt
on
once, the range hood will run
for 5 minutes and then enter stand-by mode.
LED LIGHTS
A
lways switch off the electricity supply before carrying out any operations on the appliance.
To change the light:
Open the filter and find the spring of the light, push the spring and the light will be slip out. Change
the light as with same kind of 4Volt, 2.5 Watt LED light.
Caution:
Light may be hot, please rotate when the light is cool.