Installation Guide

5
INSTALL MOUNTING BRACKETS
1. After evaluating the height of the hood, place the hook
center over installation location. Drill 3 holes of Ø8mm
on a suitable place to fix the mounting brackets.
2. Put the drywall anchors into the holes and fix the
m
ounting screws (4x40mm) into the anchors, and install
the hook on the wall as shown.
1. Calculate the final height of the U-shaped section, drill 2
holes of Ø8mm on a suitable place in line with the slider
duct fixing support.
INSTALL SLIDERY DUCT, FIXING SUPPORT
2. Put the drywall anchors into the holes and fix the mounting
scr
ews (4x40mm) into the anchors, and install the hook
on
t
he wall as shown. (The rest two parts of 4x40mm screw
and drywall anchors are for spare.)