Use and Care Manual

AUTOMATIC CENTERING GUIDES

BEFORE FIRST USE

1.Lowering the toasting lever closes the centering guides, and holds the bread or toaster food

centrally in the toasting slots.

Note: The toasting lever(s) will not lock down unless the Toaster is plugged into a 120V AC

electrical outlet.

1.Remove all packaging materials including those that may be inside the toasting slots or

toasting lever slots.

2.Wipe the exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.

3.Do not put the Toaster, cord or plug in water.

4.Be sure crumb tray is pushed all the way into the back of the Toaster and the toasting levers

are in the UP position.

5.Unwrap power cord from cord storage area on underside of Toaster and plug into a 120V AC

outlet.

6.Turn the browning control knob to (1), the lightest setting.

7.Lower the toasting levers until they lock in place. Operate without bread once or twice to burn

off any manufacturing residue. You may notice an alight amount of smoke; this is normal and

will stop as the heating elements continue to heat.