Use and Care Manual
3 4
PARTS AND FEATURES
Mixer Release Button
Speed Control
Dough Hook WhiskBeater
Stand Mixer
Bowl
Pouring Shield
BEFORE FIRST USE: Wash bowl and attachments in warm, sudsy water; rinse
and dry. Always unplug mixer from electrical outlet before inserting or removing
attachments.
1
3
2
4
65
HOW TO USE
Alwaysmakesuremixeris
unpluggedandsettingcontrol
issettoOFF(0).
Press up on mixer release button. Tilt mixer head up.
Place bowl in bowl lock and turn
clockwise until bowl locks into
place.
Slide the narrow section of the
pouring shield under mixer
attachment.
Insert attachment onto attachment
shaft and press upward as far
as possible. Turn the attachment
counterclockwise, hooking
attachment over pin on shaft.
The failure to follow any of the important safeguards and the important
instructions for safe use is a misuse of your table blender that can void your
warranty and create the risk of serious injury.
NOTE
The appliance must not be disposed of with household waste, but taken to an
authorised waste separation and recycling centre.
Recycling
Electrical Shock Hazard: This appliance is provided with a polarized plug (on
wide blade) to reduce the risk of electric shock. The plug fits only one way
into a polarized outlet. DO NOT defeat the safety purpose of the plug by
modifying the plug in any way or by using an adapter. If the plug dose not fit
fully into the outlet, reverse the plug. If it still does not fit, have an electrician
replace the outlet.
The length of the cord used on this appliance was selected to reduce the
hazards of becoming tangled in or tripping over a longer cord. If a longer cord
is necessary, an approved extension cord may be used. The electrical rating
of the extension cord must be equal to or greater than the rating of the
appliance. Care must be taken to arrange the extension cord so that it will not
drape over the countertop or tabletop where it can be pulled on by children or
accidentally tripped over.
WARNING
To reduce the risk of personal injury, always unplug mixer before inserting or
removing attachments.
The marked rating of the stand mixer is defined by agency safety standards as
the maximum stabilized power consumption of the stand mixer at high speed
under a loaded condition.
Peak power is an average of the maximum wattage a stand mixer may
consume during initial operation at high speed.
WARNING
Moving Parts Hazard.
WATTAGE/PEAK POWER INFORMATION