Instructions

HELP US TO HELP YOU:
We at Geeek Club want nothing more
than to encourage our creators (you)
to have the freedom to express your
creativity and to fully personalize
your model! However, we caution you
to not solder all the LEDs we show
on the step-by-step manual unless
you want your model to resemble
a Christmas tree. Exercise control
and moderation as the saying holds
true: “Sometimes, less is better”.
LEDs in your set are packed with
a reserve set so don’t worry if
an accident happens.
YELLOW = OPTIONAL
LOCATIONS FOR LED
PLACEMENT
NOTE:
If you try to put all of the LEDs in all of the optional placement locations then you
may experience a drop in current. That is common and you can solve this simply
by removing one or more LEDs to restore a current so that the remaining LEDs are
sufciently powered. Again, don’t overdo it! No one likes a freak disco-ball.
To help you avoid
creating your own
Christmas Tree
abomination, we have
implemented a useful
and easy to follow
Legend System with
4 special icons to show
you our engineer’s
recommended LEDs and
their placements that
will make the best-
balanced look for each
model and will also
optimize the battery
drainage.
BLACK = RECOMMENDED
LOCATIONS FOR LED
PLACEMENT