Datasheet

7
G210X STEP MOTOR DRIVE
REV 5: March 25, 2011
SPECIFICATIONS
Supply Voltage: 18 to 80 VDC
Phase Current: 0 to 7 Amps
Auto Current Reduction: 50% of set current, 1 second after last step pulse
Quiescent Current: 15 mA or less
Step Frequency: 0 to 300 kHz
Step Pulse “0” Time: 0.5 uS minimum (optoisolator LED on)
Step Pulse “1” Time: 3 uS minimum (optoisolator LED off)
Direction Setup: 0 uS min
Power Dissipation: 1 to 13 W (0 to 7 Amps)
Temp: 0 to 70 C
Humidity: 0 to 95 % (non-condensing)
Size: 2.5”W, 2.5”D, .85”H (63.5mm, 63.5mm, 21.5mm)
Mounting Pattern: 4 6-32 screws, 1.75” by 2.375” (44.5 mm, 60 mm)
Weight: 3.6 oz. (100 gm)