User Manual

2 VESA 100 Kit Installation (Optional)

First Screw the VESA100 Kit in VESA100 arm or camera cradle head/ tripod.

Place the Monitor into VESA 100 Kit, as shown in Fig, and secure the Monitor

by screwing in.

3 Install Stand 4 (optional)

Step 1 Assemble Stand 4

Select the desired angle placement

to assemble Stand 4. During as-

sembly, check if X plate is properly

inserted onto slot.

Step 2 Place On-Lap monitor onto Stand 4.

Stand 4 is positioned at the bottom center of

monitor.

Fig ： Screw the VESA100 kit in VESA

arm. Put the Monitor in and secure it

by screws.

Fig ： Screw the VESA100 kit in camera

cradle head. Put the Monitor in and

secure it by screws.

Fig ： Install Stand 4

Fig ： Place 1303 in Stand 4