User Manual

2. Package & Accessories
Section 2 Notice of On-Lap Monitor
1. When plugging out the cables, do make sure the aspect of plug is hori-
zontally—do not shake the port or plug forcefully. Any damage caused
by wrong plug inserting is not included in warranty coverage.
2. The power input specification for On-Lap monitor is 5V 2A DC current。
Input power over than 5V will cause breakdowns on monitor and this
damage is not included in warranty coverage. It is suggested to connect
both plugs of USB power cable to computer’s USB ports or manufactur-
er’s 5V-2A adapter.
3. Unstable power input will interfere with touch signal, resulting inaccurate
or failed touch function. If some high power consumption equipment
share the power in the same electricity network, it may cause acute elec-
tricity fluctuation. It is suggested to use the USB port on laptop or manu-
facturer’s 5V-2A charger.
4. Do not put touch monitor near to light blub, electric cord, or anything
with great electromagnetic wave which may disturb projective capacitive
touch monitor and cause touchscreen function abnormal.
3
Accessories 1303I 1303H 1303A
USB-A to micro-USB power and touch signal
cable (1.2m)
Yes(2 pcs) Yes(1 pcs) Yes (1 pcs)
HDMI-A to Micro-HDMI Video Cable (1.2m) Yes Yes Yes
On-Lap proprietary mini-Displayport cable Optional Optional Optional
On-Lap proprietary VGA cable (1.2m) Optional Optional Optional
Adapter(5V,Max.2A) 1 pcs Yes Yes No
Cover1 pcs Yes Yes Yes
Manual 1 pcs Yes Yes Yes
HDMI-A to micro-HDMI Video Cable (2.1m) Optional Optional Optional
Mini-HDMI to micro-HDMI Video Cable
(2.1m)
Optional Optional Optional
On-Lap proprietary DisplayPort Cable (2.1m) Optional Optional Optional
USB-A to micro-USB power and touch signal
cable (2.1m)
Optional Optional Optional
1303 VESA 100 kit Optional Optional Optional
Stand 4 Optional Optional Optional