User Manual

3. Color Setting
As show in Fig., after Color Settings is launched,
can adjust Color Temp and Color Effect to adjust
screen color setting.
Hue setting can make the image color lean to-
ward green or purple
Saturation setting can make saturation more
vivid or more black and white.
At Color Temperature, select “User”, can adjust
RGB color setting, please refer to Fig. Select
“Cool” can increase the blue saturation of the
image. Select “Warm”can increase the red
saturation of the image. At Color Effect, select
“Standard”, “Game”, “Movie”, “Photo” or
“Vivid”
Select “Standard” can adjust the Hue and Satu-
ration of Red/Blue/Green/Cyan/Yellow/Magenta
4. Aspect Ratio
Please refer to Fig. Suggested setting is 16:9.
When HDMI image is 4:3 format, can select 4:3, make image not enlarge to
16:9 and change shape. Using VGA image input
won’t have this function
Notice: When use 4:3 setting, the left and right
sides of On-Lap 1303 will show black frame. Be-
cause its not full screen image display, thus image
location and press signal location will not be the
same, will not be able to press the correct loca-
tion
Overscan: Only when input HDMI Video signal
(ex. 1080P/720P) , can use such function. Use this
function can adjust the image scan area.
5. Manual Image Adjust
Auto Adjust: Only when input VGA signal can use
such function. Will automatically adjust VGA
setting
H.Position: Moves the display area left and right .
V.Position: Moves the display area up and down
Clock: Adjust the pixel clock for user's preference
Phase: Adjust the pixel phase for user's prefer-
ence
12