User Manual

Supported Operang Modes
1920x1080P 50Hz/59.94Hz/60Hz 1280x720P 50Hz/59.94Hz/60Hz
720x480P 59.94/60Hz 640x480P 59.94/60Hz
Resoluon Refresh Rate
Horizontal Frequency (kHz) Vercal Frequency (Hz)
1280x960 60Hz 60.000 60.000
1280x1024 60Hz 63.981 60.020
1360x768 60Hz 47.712 60.015
1366x768 60Hz 47.712 59.790
1360x1024 60Hz 63.606 59.836
1400x1050 60Hz 65.317 59.978
1440x900 60Hz 55.935 59.887
1600x900 60Hz 55.990 59.946
1600x1024 60Hz 63.675 59.901
1680x1050 60Hz 65.290 59.954
1920x1080 60Hz 67.500 60.000
Secon 3 Supported Video Modes
Chapter 6 Troubleshoong
Problem Soluons
No image shown or
power Indicator can't
turn on.
1.Check the Power On/O Indicator showing green
light or not. If not, it indicates there is no power
inpued, please connect to power rst.
2.Check the HDMI cable has been rmly connected
to On-Lap monitor's HDMI port.
3.Enter OSD menu, and then select “Input Source”.
Please conrm the correct input source is selected,
and select “On” in Auto Search.
Monitor shows: “No
signal” or “Check
Cable Connecon”
Randomly no display
or go blank Or show-
ing "Insucient Pow-
er Warning" on the
monitor.
1.Please avoid pulling the cables.
2.Please connect to a 5V-2A adapter to ensure the
power supply is enough.
3.Lower the volume and the brightness. High volume
and brightness may increase power consumpon
and cause the monitor going o.
The monitor dis-
plays black or white
screen; or the OSD
menu cannot be
used.
Please press both “Decrease Volume /Down ”
buon and “Exit” buon at the same me to reset,
and the monitor will then reset as factory sengs.
11