User Manual

(3)Display and touch funcon working normally; only variaon in ap-
pearance (i.e., ageing, arion, scratch, color changing and etc.).
(4)Any breakdown caused by power supply. (i.e., inpung power over 5V or
unsteady current)
(5)Any damage caused by disoperaon or failure to follow this manual. (i.e.,
Plug or unplug the cable in wrong direcon and causing damage on cable
or monitor.)
(6)Any damage caused by hing or cracking monitor accidentally or
purposely, or collapsing or overturning monitor.
● Built-in Baery Exclusions from Warranty (Only for 1102H)
The warranty doesn't apply to the following situaons;
1) The baery capacity loss caused by aging.
2) The Baery inside or connecter is oxidized or rusted caused by seeped
liquid.
3) Any abnormal use by man made.
Lithium Polymer Baery Safety Cauons
1. On-Lap 1102H equips a built-in Li-polymer baery. Please keep away from
any ame. Do NOT use the monitor near heang sources over 60℃(140°F),
such as stove, microwave, steam cooker or any heang devices, otherwise it
may lead to baery leakage or explosion. Please do NOT store the product
in a car under sun heat or any environment above 60℃(140°F).
2. Avoid storing the monitor in a humid environment, or it may cause the
eect of high self-discharge. Low temperature could damage chemical
materials inside the baery; high temperature may cause explosion.
3. When the monitor is turned o, the lithium polymer baery could be self-
discharge, and the power will be slowly consumed. It is recommended to
charge the lithium baery to three bars before storage. If stored for a long
period, the baery may over-discharge, and lead to charging failure. Do
charge the baery full before its storage. The baery discharges its power
slowly even not in use. Please check the power regularly and charge it in
me.
4. According to ICAO regulaons, you need to transport all electric devices
with built-in baery in the luggage. Do pack the monitor in a box or with
cushion materials to avoid accidentally turning on the monitor. (Please
check the details of baery transportaon regulaon to your airline compa-
ny)
5. Do NOT pierce the baery with sharp objects.
6. Do NOT disassemble the monitor, replace or disassemble the baery.
7. Do NOT dispose of this product with your other household waste.
LCD Pixel Statement
There is slightly uneven brightness on the screen when displaying dierent
screen paern. The LCD screen has 99.99% or more eecve pixels. 0.01% of
pixels or less may not light or may light incorrectly. The On-Lap monitor uses a
high quality LCD panel. Nevertheless, pixels on the LCD screen may not light or
appear as red or black dots. All the above are normal with the LCD monitor
and will not aect the normal usage of the product.
Avoid placing the monitor against sun-light, or it may damage the monitor.
An aerimage of the previous screen may remain, when the same image is
displayed for hours. In this case, the screen is recovered slowly by turning o
the power for a few hours.
II