User Manual

14
Chapter 5 Using Touch Monitor (Only for 1102I)
Secon 1 Noces
1. Computer with operang system of Windows
10/7 supports On-Lap 1102I's touch funcon.
If computer does not be equipped with Win-
dows 10/7, it may not be able to use On-Lap
1102I's touch funcon. Please be noced
whether the computer's operang system
supports an external touch monitor.
2. As the g., USB power & touch cable ① can
transmit both power and touch signal at the
same me; ② only can transmit power. If ① connector does not connect
to computer's USB port , then touch funcon will be no longer available.
Secon 2 Windows 10/7 Touchscreen Sengs
If your computer does not enable touch screen funcon automacally or rec-
ognize mul-screen, then touch screen will not sense touch posion accurate-
ly. Please use Windows 10/7 "Tablet PC Sengs" of Control Panel to start
touch screen sengs.
In Windows 10, search "Calibraon" at 'Sengs', then select "Calibrate the
screen for pen or touch input." In Windows 7, select "Tablet PC Sengs" at
Control Panel to start touch sengs.
As the g. below, please select "Sengs (S)", and follow Windows on-screen
instrucons to calibrate the touch points on On-Lap 1102 to complete touch
sengs.