User Manual
The power indicator shows blue light while charging. After about five hours, the battery
can be fully charged. The power indicator light will extinguish automatically, indicating that
the battery has saturated. Please then unplug the 5V 2A adapter.
3. Battery Usage
(1)When not connected with the USB power cable, press the power button , and On-
Lap1102H will boot automatically and use the battery power. The power indicator will
show "green light".
(2)Battery Bar Icon: After turning on the monitor (power indicator shows green light),
entering the OSD menu, the upper right corner will show the Battery Power icon. When
the icon drops to one bar or zero bar , it means the battery power is too low. Please
turn off monitor and charge the battery.
PS. When the monitor is off, lithium battery will self-discharge power gradually. It is
suggested to store 1102H with battery capacity more than 3 bars .
4. Battery Charging Bar Description
Fig.: Charging Bar Icon at the
upper right corner of OSD menu
The remaining me is esmated based on brightness 70 and Volume 50. The
power consumes quicker if the brightness and volume is set higher.
When there is only one bar le , the
power voltage drops quickly and the moni-
tor will appear "Insucient Power" cau-
on on the screen. Then the monitor en-
ters ECO Mode or cannot work normally.
please shut down the monitor right away.
Fig.: Insucient Power cauon
12
Power Bar Icon Power Status Remaining Time
About 100% About 4.5 hrs.
About 75% About 3.3 hrs.
About 50% About 2.5 hrs.
About 25% About 0.8 hrs.