User Manual

7
Secon 6 Lay Touch Monitor Flat with 1102 Mul Mount Kit
As the g., rstly use three M2x5mm
screws to x the monitor to the Moni-
tor Bracket. Aer selecng the view-
ing angle of 75°,62°,42° or 25°, use
two M4x5mm screws to x Bracing
Plate to the Monitor Bracket.
Secon 7 Install 1102 to VESA 75 monitor Arm or Wall Mount
(With 1102 Mul Mount Kit)
As the g., rstly use three M2x5mm screws to x the monitor to the Moni-
tor Bracket. Then use four M4x5mm screws to x the Monitor Bracket to the
arm.
Secon 8 Install Rear Dock
As the g., remove the rubber bung at the rear of the monitor.
Insert "Rear Dock" to the rear port on the 1102 and screws it up. Users can
plug in computer sck ( such as Intel
®
Compute Sck) or HDMI wireless dis-
play adapter (such as Microso
®
Wireless Display Adapter) to the HDMI-A
port of Rear Dock. Please press the menu buon on the monitor to enter
OSD menu and choose "HDMI 2" as "Input Source."
Warning: The 1102H built-in baery only powers 1102 monitor. The
baery can't power Rear Dock or the devices installed on it, such as Wire-
less Display Adapter.