Specification
Table Of Contents
GEBERIT SYSTEM ACCESSORIES
Optional Waste Fittings
© 2020 Geberit. Product specications subject to change without notice.
1
GNA7274 09/20
Waste Fitting Discharge
Congurations for Floor Mount
Back Outlet Toilets
Note: Mounting collar/clamp
by installer
FF
FF
A.
Floor-Mount
R
ear Discharge
into Wall
B.
Floor-Mount
Rear Dischar
ge
into Floor
Description Model Number
111.335
111.902
111.798
111.597
111.012
111.018 111.520 111.524 111.490 111.625
109.304
109.307 109.797
PP connector set with bend for oor-mount
toilets with mounting hardware, 1 x 90° bends
with socket for Ø4.375” (Ø110 mm) push t
piping for Ø3.82”–4.21” (Ø97–107 mm) male
connection and expansion to Ø4.375”
(Ø110 mm) outlet
152.647.00.1
(For A or B
discharge.
See above)
HDPE waste tting outlet bend, 1 x 90° bend
with socket for Ø3.50” (Ø90 mm) push t piping
and Ø3.50” (Ø90 mm) outlet
366.061.16.1
(For A
discharge.
See above)
HDPE straight connector with socket for
Ø3.50” (Ø90 mm) push t piping and Ø3.50”
(Ø90 mm) outlet x 12” (31 cm) long
366.887.16.1
(For A
discharge.
See above)
HDPE connector with oset for LH horizontal
drain connections (as viewed from sitting
position), 1 x 90° bend with socket for Ø3.50”
(Ø90 mm) push t piping, with 45º oset and
Ø3.50” (Ø90 mm) outlet for 5.5” (13.97 cm)
minimum walls only.
366.913.16.1
(For A
discharge.
See above)
HDPE connector with oset for RH horizontal
drain connections (as viewed from sitting
position), 1 x 90° bend with socket for Ø3.50”
(Ø90 mm) push t piping, with 45º oset and
Ø3.50” (Ø90 mm) outlet for 5.5” (13.97 cm)
minimum walls only.
366.914.16.1
(For A
discharge.
See above)
Cast iron tting; 90° 3.5" (90 mm) inlet, 3" outlet,
2" NPTF heel outlet
367.072.18.1
(For A
discharge.
See above)
HDPE “Back-to-back” connector for horizontal
drain connections; 2 x 90° bends with sockets
for Ø3.50” (Ø90 mm) push t piping, with 45º
oset and expansion to Ø4.375” (Ø110 mm)
outlet for 10.75” (27.31 cm) minimum walls
only.
367.485.16.1
(For A or B
discharge.
See above)
HDPE “Back-to-back” connector for vertical
drain connections; 2 x 90° bends with sockets
for Ø3.50” (Ø90 mm) push t piping and
expansion to Ø4.375” (Ø110 mm) outlet for
10.75” (27.31 cm) minimum walls only.
367.923.16.1
(For A or B
discharge
See above)
Note: Any of these ttings in combination with Geberit installation systems are cUPC and IPC listed.
SPECIFICATIONS
Installation accessories for Geberit Duox
concealed carriers. Accessories shall be
for alternate waste tting installations,
including cast iron elbows, back-to-back,
and horizontal runs.
FEATURES
Installation accessories for:
• Straight back
• Left hand or right hand runs
• Cast iron 90
• Back to back vertical or left hand/right
hand runs
WARRANTY
• One-year limited warranty against
manufacturers’ defect