Manual

4
105 Webster St. Hanover Massachusetts 02339 Tel. [phone] Fax [phone] www.gearseds.com
Copyright GEARS Educational Systems 2005
Note: Be careful to align the orientation of the 11 hole flat bar to the 13 hole angles as shown in figures 5 and 6. Mount the 7
hole flat bar diagonally as shown in figure 6. Attach the #10-24 coupling nuts to the end holes of the angles as shown in
figure 6.
Step Four: Attach the Sine Triangle
Obtain these components:
Qty. Description
1 Sine Triangle
2 #10-24 x 3/8” machine screw and washer
Procedure
Use two #10-24 x 3/8” Phillip head machine screws and
flat washers to attach the sine triangle to the coupling nuts as shown in figure 7.
Step Five: Repeat the Procedure for the Other Side
Fig. 7
Fi
g
. 8