User guide

32
D
GB
F
E
96280-12.2014-DGbFEIRu
10 | Declaration of conformity and installation
DECLARATION OF CONFORMITY CE 13
for using the compressors within the European Union
(inaccordancewithLowVoltageDirective2006/95/EC)
We hereby declare that the following refrigerating compressors
Product designation: HG44e
comply with the Low Voltage Directive 2006/95/EC.
Applied harmonised standard:
EN 60034-1:2010
EN 60204-1:2006
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(inaccordancewithMachineryDirective2006/42/EC)
The manufacturer: GEA Bock GmbH, Benzstraße 7
72636 Frickenhausen, Tel.: [phone]
hereby declares that the refrigerating compressor HG44ecomplieswiththebasicrequirements
of Appendix II 1B of the Machinery Directive 2006/42/EC.
Applied harmonised standard:
EN 12693:2008 and the corresponding standards referenced
A partly completed machine may only be put into operation when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulationsoftheMachineryDirective(2006/42/EC).
Themanufacturerundertakestotransmitelectronicallythespecialdocumentationrequiredby
individualstatesforpartlycompletedmachineryonrequest.
Thespecialtechnicaldocumentationrequiredforpartlycompletedmachineryhasbeencreated
in accordance with Appendix VII Part B.
Person responsible for documentation is: Wolfgang Sandkötter, Benzstraße 7, 72636 Frickenhausen.
Frickenhausen, 25.11.2013 ppa. Wolfgang Sandkötter,
ChiefDevelopmentOfcer