User guide

96280-12.2014-DGbFEIRu

5| Electrical connection

Relay position INT69 G

B2 12 14 11

Fig. 24

5.8 Function test of the trigger unit INT69 G

Before commissioning, after troubleshooting or making changes to the control power circuit, check

the functionality of the trigger unit. Perform this check using a continuity tester or gauge.

Gauge state Relay position

Deactivated state 11-12

INT69 G switch-on 11-14

Remove PTC connector 11-12

Insert PTC connector 11-12

Reset after mains on 11-14