Manual

26
D
GB
F
E
96191-11.2014-DGbFE
10| Declaration of conformity and installation
DECLARATION OF CONFORMITY CE 08
for using the compressors within the European Union
(inaccordancewithLowVoltageDirective2006/95/EC)
We hereby declare that the following refrigerating compressors
Product designation: HG34e A
comply with the Low Voltage Directive 2006/95/EC.
Applied harmonised standard:
EN 60034-1:2010
EN 60204-1:2006
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(inaccordancewithMachineryDirective2006/42/EC)
The manufacturer: GEA Bock GmbH, Benzstraße 7
D-72636 Frickenhausen, Tel.: [phone]
hereby declares that the refrigerating compressor HG34e A conforms to the essential
requirementsofAnnexII1BoftheMachineryDirective2006/42/EC.
Applied harmonised standard:
EN 12693:2008 and the corresponding standards referenced
A partly completed machine may only be put into operation, when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulationsoftheMachineryDirective(2006/42/EC).
Themanufacturerundertakestotransmitelectronicallythespecialdocumentationrequiredby
individualstatesforpartlycompletedmachineryuponrequest.
Thespecialtechnicaldocumentationrequiredforpartlycompletedmachineryhasbeencreated
in accordance with Annex VII Part B.
Person responsible for documentation is:
Wolfgang Sandkötter, Benzstraße 7, 72636 Frickenhausen.
Frickenhausen, 01.11.2011 ppa. Wolfgang Sandkötter,
ChiefDevelopmentOfcer