Instruction Manual

26
D
GB
F
E
96098-11.2014-DGbFE
10| Declaration of conformity and installation
DECLARATION OF CONFORMITY CE 08
for using the compressors within the European Union
(inaccordancewithLowVoltageDirective2006/95/EC)
We hereby declare that the following refrigerating compressors
Productdesignation: HG22P A
complywiththeLowVoltageDirective2006/95/EC.
Appliedharmonisedstandard:
EN60034-1:2010
EN60204-1:2006
DECLARATION OF INSTALLATION
for using the compressors within the European Union
(inaccordancewithMachineryDirective2006/42/EC)
Themanufacturer: GEABockGmbH,Benzstraße7
  D-72636Frickenhausen,Tel.:07022/9454-0
hereby declares that the refrigerating compressor HG22P A conforms to the essential
requirementsofAnnexII1BoftheMachineryDirective2006/42/EC.
Appliedharmonisedstandard:
EN12693:2008andthecorrespondingstandardsreferenced
A partly completed machine may only be put into operation, when it has been established
that the machine, into which the partly completed machine is to be installed, conforms to the
regulationsoftheMachineryDirective(2006/42/EC).
Themanufacturerundertakestotransmitelectronicallythespecialdocumentationrequiredby
individualstatesforpartlycompletedmachineryuponrequest.
Thespecialtechnicaldocumentationrequiredforpartlycompletedmachineryhasbeencreated
inaccordancewithAnnexVIIPartB.
Personresponsiblefordocumentationis:
WolfgangSandkötter,Benzstraße7,72636Frickenhausen.
Frickenhausen, 01.11.2011 ppa. Wolfgang Sandkötter,
ChiefDevelopmentOfcer