Installation guide

Installation
Built-In Speedcook Ovens
Remove
Packaging
and Parts
• Open the door and remove packing material
with ceramic tray.
• Locate owners kit in carton. Remove and
save.
• Locate box with metal trays in carton.
Remove and save.
• Locate parts package containing 5 mounting
screw's. (4 required, 1 extra)
IMPORTANT:To protect the bottom trim, do
not remove the styrofoam shipping base until
the oven is slipped into the opening.
Route
Conduit
Through
Cutout
2 people are required
to lift the oven into the opening. Grasp the
bottom at fi'ont and rear. Discard styrofbam
base. DO NOT USE HANDLE TO LIFT
THE OVEN. DAMAGE WILL OCCUR!
With oven in front of the cabinet opening:
• Insert conduit into cabinet opening.
• Lift the oven into the opening while
continuing to feed the conduit in the
direction of the installed junction box.
Be sure the conduit does not get pinched
between the back of the oven and the
cabinet wall.
J J
ShippingBase
Seo_re
Oven
to Cabinet
• Slide oven into the cabinet opening.
• Drill 3/32" pilot holes into the cabinet frame
through the 4 mounting holes in the oven
fi'ont frame.
• Secure oven to cabinet with screws supplied.
Securely fasten oven to
cabinet using the screws provided. Failure
to do so could cause the oven to move or
tip during use and result in personal it_iury.
ttachment
Screws
SecureOvenTo Cabinet
With ScrewsProvided
6