User Manual

monogram.com
39
Professional gas rangetops
Gas cooktopsElectric cooktops Induction cooktops
16" Min
Junction
Box
605Dia125
Electrical requirements
Product rating is 208 or 240V, 60Hz; 36" cooktops require a
50-amp circuit; 30" cooktops require a 40-amp
circuit. The cooktops must be connected to a supply circuit
of the proper voltage and frequency and protected by a
time-delay fuse or circuit breaker.
Combination installations
Consideration must be given to electrical supply locations when
the cooktop is installed with other products in the same cabinet.
Always refer to each product’s installation instructions for
clearances and electrical requirements.
• Install these cooktops with any exhaust hood of the same or
greater width; 300 CFM or greater air flow rating is recommended.
• Install the 36" cooktop with a 36" downdraft vent. See downdraft
vents for details.
• A Monogram single oven may be installed below these cooktops.
• It is not recommended to install these cooktops above a drawer.
The serial plate is located on the bottom of the cooktops.
All models require 12"
minimum clearance below
the cooktop bottom to
combustible materials.
Advance planning for induction cooktops
30" induction cooktop (in inches)
A B (depth at sides) B (at center)
29-3/4" 20-13/16" 21-3/8"
605Dia124
A
28-1/2"
2" Min.
to Side Walls
B
2-1/2" Min.
to Front Edge
1-3/4"
Min.
19-5/8"
ZHU36RSRSS mirrored
metallic
ZHU36RBMBB black
605Dia123
A
33-7/8"
2" Min.
to Side Walls
B
2-1/2" Min.
to Front Edge
1-3/4"
Min.
19-1/8"
3-1/4"
4-5/8" at
Front Baffle
Note: When the cooktop
is installed over an oven,
the baffle at the front is
not required.
ZHU30RSRSS mirrored
metallic
ZHU30RBMBB black
36" induction cooktop (in inches)
A B (depth at sides) B (at center)
36" 20-5/16" 20-7/8"