Installation guide

Installation
Microwave Oven
Finalize
under-cabinet
installation
3_l__d A_Top of BottomShelf
D°°r_,_nt of Cabinet
Sideof
Microwave
?_
Bracket
With template secured in place, check again
that hole center lines on Template 2 are
straight, and that distance fi'om right to left
hole center measures distance shown on
template.
Drill mounting holes:
Use of safety glasses is recommended to
protect the eyes.
-Empty cabinet and remove delicate items
fi'om adjacent cabinets.
Use center punch or nail to make an
indentation for centering the drill bit.
-Holding drill straight, drill through
Template 2 at the four black drilling holes
indicated on template.
Remove template and clean drill holes.
• Select four bolts--one of each size--fl'om
parts package.
• Hold each bolt against cabinet fl'ont rail.
• Select bolt that extends beyond top of
bottom shelf by 3/16" to 3/4".
Correct bolt length is important. If bolt is
too short, it won't reach oven; if bolt is too
long, oven will not be drawn up tight to
cabinet.
• From inside cabinet, insert four bolts, all
same length, through mounting straps and
then into drilled holes of cabinet shelf.
• Place solid sut)port, such as a stack of books,
under oven to raise it close to cabinet
bottom.
• Align mounting holes on oven with bolts.
• Lift oven, and insert bolts into mounting
holes.
• Tighten bolts alternately to draw oven up
evenly and secure it to cabinet bottom.
• Remove oven's rubber feet and save for
future use.
• Plug power cord into receptacle.
14